Certified Waterproofing crews in Melbourne, backed by a written warranty and same-day emergency dispatch.
📞 Call Now — Free EstimateArrow Tight Waterproofing exists because too many property owners in Melbourne were getting patchwork fixes instead of real diagnosis. Our crews are licensed in KY, carry full liability coverage, and are trained to find the actual water path before recommending anything.
We've built our reputation in Melbourne on jobs that don't need a second visit. That means slower quoting sometimes, since we're inspecting properly instead of estimating from a driveway conversation, but it also means fewer callbacks.
We keep detailed job records for every property in Melbourne we've serviced, which means if you call back in three years with a question about your system, we can pull the exact specs of what was installed rather than starting from scratch.

Most foundation failures don't start as floods — they start small, and they're easy to miss until the damage compounds. Here's what our technicians look for on every inspection in Melbourne.
That chalky white residue on concrete or block isn't dirt — it's mineral salt left behind after water has already migrated through the wall.
If a dehumidifier only masks the smell instead of fixing it, there's an active moisture source somewhere in the structure.
This is the exact spot our technicians check first on every basement inspection, because it tells us more about the pressure situation than almost anywhere else.
A sump that runs nonstop during rain is a system working past its design limit, not a system doing its job well.
Measuring wall deflection with a level is one of the first things we do on any inspection where bowing is suspected, since the degree of lean changes the recommended fix.
This sign often gets dismissed as cosmetic, but it points to water reaching structural steel, which is a different severity than surface dampness.
By the time drywall is visibly damaged, the moisture behind it has usually been present for weeks or months already.
Floors that stay cold and slightly damp-feeling even with the heat running usually trace back to an open or failed vapor barrier beneath the house, not an HVAC problem.
From emergency response to full commercial systems, here's the range of Waterproofing work our crews handle in Melbourne.

When water is actively entering a property in Melbourne, our first priority is stopping the intrusion, then extracting standing water before secondary damage sets in.
We carry the equipment needed to control an active situation immediately, then scope the permanent fix once the emergency is under control.
📞 Get a Free Quote →For homeowners in Melbourne, we install interior drain tile, sump systems, and crawl space encapsulation sized to your property's actual groundwater load — not a one-size package.
Every residential install includes post-job moisture verification, so you have documented proof the system is working, not just our word for it.
📞 Get a Free Quote →For property managers in Melbourne, we coordinate around occupied units and business hours, minimizing disruption while still delivering a full waterproofing scope.
Commercial jobs get the same commercial-grade materials as our residential work — nothing scaled down because the client is a business instead of a homeowner.
📞 Get a Free Quote →When a foundation issue is structural rather than purely a water problem, we bring in the crack-classification and reinforcement expertise that basic waterproofing crews don't carry.
Every structural repair is documented with before-and-after photos and moisture readings as part of your warranty file.
📞 Get a Free Quote →Failed or undersized sump pumps are one of the most common reasons a previously working system suddenly floods, and we treat pump sizing as its own diagnostic step, not an afterthought to drainage work.
We also correct discharge line routing and grading as part of any pump job, since a poorly graded discharge line often just recirculates water back toward the foundation.
📞 Get a Free Quote →These aren't marketing lines — they're the specific practices that separate a repair that lasts from one that doesn't.
Pricing surprises are the single biggest complaint we hear about competitors, so we built our proposal process specifically to eliminate them.
We don't run a single centralized dispatch queue; regional staging means the crew reaching you in Melbourne isn't driving hours to get there.
Warranty documentation is registered to the property address, so it transfers automatically if you sell, without needing to track us down for paperwork.
Material selection isn't where we compete on price — we'd rather lose a bid than install something we know will fail in a few years.
A diagnosis-first approach costs us more time per estimate, but it's the reason our repeat-callback rate is a fraction of the industry average.
Call +1-866-476-1348 and describe the issue. We route the right technician for your specific situation rather than a generalist.
Expect the inspection itself to take 45 to 90 minutes depending on property size and how many areas need checking.
If the proposal includes options — say, interior versus exterior drainage — we'll walk through the tradeoffs so you're deciding with full information.
Our crew completes the approved scope, verifies the fix with post-install moisture readings, and hands you written warranty documentation registered to the property.
Our crews are ready to assess your property today — call now.
📞 Get a Free Estimate: +1-866-476-1348
"Had a cove joint leak that two other companies just patched without explaining why it kept happening. Arrow Tight Waterproofing's technician showed me the moisture readings and traced it to hydrostatic pressure, then installed drain tile that's held through every storm since.Would recommend them without hesitation."
"Called at 11 PM with active water coming in during a storm. Live person answered immediately, crew was on-site within the hour, and they had a temporary pump running before starting the real diagnosis.That's the kind of fix that actually holds up."
"We manage a small multi-unit building and needed the work scheduled around tenants. They coordinated everything cleanly and the commercial-grade membrane they used has zero callbacks two years later.Would recommend them without hesitation."
"Appreciated that they didn't just sell us a package. The inspection actually found the real problem — a bowing block wall — and the carbon fiber reinforcement plus crack injection fixed it properly instead of just sealing the surface.Would recommend them without hesitation."
"Sump pump had been cycling nonstop for weeks before we called. They correctly diagnosed it as undersized for our actual water table and upgraded it — no more constant cycling, and it's kept up with two heavy storms since.That's the kind of fix that actually holds up."
"We're a small property management company and needed drainage work done across three units without disrupting tenants. Arrow Tight Waterproofing scheduled around occupied hours, communicated clearly with residents, and the itemized invoice matched the original proposal exactly.That's the kind of fix that actually holds up."
Arrow Tight Waterproofing provides Waterproofing services in Melbourne, with crews staged regionally to keep response times reasonable whether you're in a dense metro area or further out.
Call +1-866-476-1348 to confirm coverage for your specific address — given our regional staging in Melbourne, it's very likely within our service area.
Whether your property in Melbourne has a finished basement, an unfinished crawl space, or a slab foundation, our crews carry the equipment and training to assess and quote all three foundation types on the same visit.
New service areas are added as we expand our regional crew staging, so if you were told we didn't cover your address in the past, it's worth checking again.
